دستگاه محاسبه وزن

دستگاه محاسبه وزن

دستگاه محاسبه وزن

Attention The system is suitable for elevator that adopts the Can_BUS
agreement rope installed load weighing device, please kindly read the
following chapters before operation. The elevator load weighing device
has strict payload limit, please suitably installed our company will not
responsible for any loss for person and the device caused by unsuitbale
operation otherwise.
Note We are only responsible for the quanlity of products itself in any
cases.

Announcement
Our company reserve the right to change the products
for the development of the technology, the parameters will be subject to
random products manaul.1. The sketch of the mechine appearancepicture[1]
2. The installation sketch of the movable car system picture[2]
Try to install the sensor at the center of the car or the original overload
switch of the elevator, installing the sytem at the bottom beam of the
supporting, getting the inductive magnet attracted on the moving car and
make sure the observe side faces the induction point of the sensor.
The support of the system should be made according to the basis
condition of the elevator, and adopt to the material which is not so easy to
deformation. The thickness of the support should be more than 4mm or
with reinforcement to avoid swinging.
Installing the system to let the magnet at the bottom of car f

دستگاه محاسبه وزن

EWD-RL-SJ3 elevator load weighing device
This system can be adopted to all kinds of elevator with three -way
switch and 1 analog output port.

Main features Ultrathin character “” load sensor to direct detect the changes of the car load, there is no need to change the traction taper sleeve rod.

1. All operating parameters can be set at the spot.
2. The unique programmable output signal control method can meet the the requirements of the weighing signal of varieties of fixed car platform.
3. It is easy to operate the self-learning model at the spot. The user can choose 20~100 rated self-learning model or rated set model, quite easy to operate.
4. With the ability to amend the working parameters automatically and
self-adoption intelligent landing compensation.
5.With simulation - 10 ~ + 10 V voltage output port, matching with the speed controller to improve the performance of the elevator.
6.Small volume, convenient installation, low prices.
این سیستم می تواند به تمام انواع آسانسور با سه راه مورد استفاده قرار گیرد

1. تمام پارامترهای عامل را می توان در نقطه ای تنظیم کرد
برنامه ریزی منحصر به فرد آن میتواند الزامات سیگنال توزین انواع پلت فرم ماشین ثابت را تامین کند.
یادگیری

دستگاه محاسبه وزن آسانسور

Elvator weighting devices and load sensor

Attention The system is suitable for elevator that adopts the Can_BUS
agreement rope installed load weighing device, please kindly read the
following chapters before operation. The elevator load weighing device
has strict payload limit, please suitably installed our company will not
responsible for any loss for person and the device caused by unsuitbale
operation otherwise.




Note We are only responsible for the quanlity of products itself in any

cases.

Announcement Our company reserve the right to change the products

for the development of the technology, the parameters will be subject to

random products manaul.
خواهشمند استفاده از ان به اندازه ظرفیت تایین شده هستیم شرکت ما مسئولیتی در قبال استفاده نامناسب نمیپذردوشرکت مسئول ارائه اجناس با کیفیت بالا میباشد

دستگاه محاسبه وزن

دستگاه محاسبه وزن
خروجی 3-کانال حالت خروجی قابل برنامه ریزی است بدون بار، بار سبک، بار نیمه کامل، بار سنگین، بار مجاز، بیش از بار خروجی های آنالوگ محدوده جبران خسارت در کل دوره 0-10V /-10-10V

Output：3-channel programmable output modes areNo load,light load,semi full load,heavy load,rated load,over loadEach channel can be programmed as dynamic Close or Open contactAnalog outputCompensation range in the whole course0-10V/-10-10V

دستگاه محاسبه وزن

Elevator load weighing device
Output：3-channel programmable output for 6 loading conditions of No load,light load,semi full load,heavy load,rated load,over loadProgrammable Dyn.Open/Dyn.Close Contacts for each Output



خروجی 3-کانال خروجی قابل برنامه ریزی برای 6 شرایط بارگذاری بدون بار، بار سبک، بار نیمه کامل، بار سنگین، بار مجاز، اضافه بار