Wire Rod

Compact rock cutting wire

In order to cut the rocks in mines they use a specific structure of steel wire rope known as rock cutting wire rope. this type of wire rope has the structure of 6X7 and has a compact surface which means that the wire rods have a flat profile on the outer side. in most cases 4.8 mm diameter of wire rope is used for this purpose.

Steel Wire Rope

The steel rope, which we know as tow wire in Iran, is a steel rope, which is made of several steel strands woven together, which is also made of several wires. Steel is made around a central wire.
Wires are classified into two general categories: "steel core wire" and "hemp core wire". Each of these two types has its own uses according to the way of use and the place of use.

What is hemp cord towing?
In some steel ropes, according to the environmental conditions and technical conditions that are considered in moving the load, or the conditions of the machine in which the towing wire is used, we are required to use this type of towing wire.
Hemp ropes are divided into two categories: natural fibers and synthetic fibers.
NFC: Natural Fiber Core tow rope with natural hemp: this type of tow rope has a hemp core made of natural fibers of the hemp plant. Among the features of this type of fiber is the ability to absorb grease in the core of the towing wire, which causes the release of the grease stored in the hemp under high pressures and lubricates and reduces the abrasion of the steel wires to each other.
SFC: Synthetic Fiber Core: This type of tow wire has a core made of polymer fibers. In fact, the steel rope woven in its core has a rope woven with polymer fibers called pol

PC Strand 3/8

Production and supply of prestressed concrete PC Strand: Prestressed Concrete Steel Strand in Kariz industrial equipment.

Prestressed concrete strand, size 3.8 inches
0.5 inch prestressed concrete strand
0.6 inch prestressed concrete strand
Production and supply of necessary nailing and pre-tensioning operations, including:
- Anchorage Anchorage
- Finger Wedge
- Angle washer
- Injection hose
- Hose sheath
- Star Spacer - Solar Spacer

In order to make the prestressed concrete strand, the wire rod with 82B grade, which is high in carbon, is pulled through special steps and special conditions to reach the desired wire. Then these wires are woven around a central wire to form a strand. At the end, the prepared strand is entered into the heat treatment stage so that the stresses created in the steel particles during the previous steps are removed from it, so that it achieves a higher tensile capacity in this product.
Prestressed concrete strand is manufactured according to the ASTM A-416 standard American Society for Testing and Materials, and each production, inspection, and post-production testing process is carried out according to this regulation.
The desired tensile strength in this type of steel strand is 1860 N/mm2 equivalent to 270 K.
Concrete strand is usual

PC Strand 0.5

Production and supply of prestressed concrete PC Strand: Prestressed Concrete Steel Strand in Kariz industrial equipment.

Prestressed concrete strand, size 3.8 inches
0.5 inch prestressed concrete strand
0.6 inch prestressed concrete strand
Production and supply of necessary nailing and pre-tensioning operations, including:
- Anchorage Anchorage
- Finger Wedge
- Angle washer
- Injection hose
- Hose sheath
- Star Spacer - Solar Spacer

In order to make the prestressed concrete strand, the wire rod with 82B grade, which is high in carbon, is pulled through special steps and special conditions to reach the desired wire. Then these wires are woven around a central wire to form a strand. At the end, the prepared strand is entered into the heat treatment stage so that the stresses created in the steel particles during the previous steps are removed from it, so that it achieves a higher tensile capacity in this product.
Prestressed concrete strand is manufactured according to the ASTM A-416 standard American Society for Testing and Materials, and each production, inspection, and post-production testing process is carried out according to this regulation.
The desired tensile strength in this type of steel strand is 1860 N/mm2 equivalent to 270 K.
Concrete strand is usual

PC Strand 0.6

Production and supply of prestressed concrete PC Strand: Prestressed Concrete Steel Strand in Kariz industrial equipment.

Prestressed concrete strand, size 3.8 inches
0.5 inch prestressed concrete strand
0.6 inch prestressed concrete strand
Production and supply of necessary nailing and pre-tensioning operations, including:
- Anchorage Anchorage
- Finger Wedge
- Angle washer
- Injection hose
- Hose sheath
- Star Spacer - Solar Spacer

In order to make the prestressed concrete strand, the wire rod with 82B grade, which is high in carbon, is pulled through special steps and special conditions to reach the desired wire. Then these wires are woven around a central wire to form a strand. At the end, the prepared strand is entered into the heat treatment stage so that the stresses created in the steel particles during the previous steps are removed from it, so that it achieves a higher tensile capacity in this product.
Prestressed concrete strand is manufactured according to the ASTM A-416 standard American Society for Testing and Materials, and each production, inspection, and post-production testing process is carried out according to this regulation.
The desired tensile strength in this type of steel strand is 1860 N/mm2 equivalent to 270 K.
Concrete strand is usual

anchorage and Wedge

Production and supply of prestressed concrete PC Strand: Prestressed Concrete Steel Strand in Kariz industrial equipment.

Prestressed concrete strand, size 3.8 inches
0.5 inch prestressed concrete strand
0.6 inch prestressed concrete strand
Production and supply of necessary nailing and pre-tensioning operations, including:
- Anchorage Anchorage
- Finger Wedge
- Angle washer
- Injection hose
- Hose sheath
- Star Spacer - Solar Spacer

In order to make the prestressed concrete strand, the wire rod with 82B grade, which is high in carbon, is pulled through special steps and special conditions to reach the desired wire. Then these wires are woven around a central wire to form a strand. At the end, the prepared strand is entered into the heat treatment stage so that the stresses created in the steel particles during the previous steps are removed from it, so that it achieves a higher tensile capacity in this product.
Prestressed concrete strand is manufactured according to the ASTM A-416 standard American Society for Testing and Materials, and each production, inspection, and post-production testing process is carried out according to this regulation.
The desired tensile strength in this type of steel strand is 1860 N/mm2 equivalent to 270 K.
Concrete strand is usual