Screw

INA ball screw

Ball screw with the German INA brand is part of the large Shoffler brand, which also produces all kinds of bearings under the name of FAG and INA rolling bearings. One of the most important quality factors in the production of ball screws is the use of materials and metal alloys with high mechanical capabilities. The high technology of INA ball screw production is due to the use of steel alloys with suitable compositions and of course special heat hardening treatment which has emerged during several stages of cooling and heating. Different parts of the ball screw body with this brand are installed as a complete assembly after production and tested by laser to ensure their performance and fluidity by qualitative examination.

HIWIN ball screw

The most well-known and top producer of ball screws in the world is the American HIWIN brand. In fact, this industrial brand specializes in the production of ball screws according to the ASTM American industry standard. HIWIN brand ball screws are used in the Boeing aircraft industry, the military equipment of the United States and in the aerospace equipment of the American NASA company, which shows the quality of the products of this brand.
HIWIN ball screws are sold in two grades of alloy steel and stainless steel. HIWIN brand steel ball screw is produced by using steel carbon alloys that are hardened under heat treatment to have high load capacity and extraordinary wear resistance.

M5 pan head screw

Pan head screws are actually the type of machine screws that need to be drilled with a drill for connection. Pan head screw have a body or screw body with a fixed diameter, which is threaded as a fine thread. The name of the lentil head screw is derived from the flower screw, which is designed in the shape of a curved lens and is flat in the bottom part of the screw, which is where the flower and soul meet. At the time of connecting the 5mm M5 Pan head screw, the entire bolt remains on the work surface. The M5 steel lens head cylindrical screw connection is made by using hexagon nuts and steel washers and in some cases internally and involved in the work piece.

roofing self drill screw

A drill tip screw is actually a type of self-tapping screw that does not need to drill a hole to enter the surface. As its name suggests, the screw tip of a drill bit acts like a drill bit, and their connection is often done with a device. Drill tip screws are also known as gable screws because their hexagonal type is widely used in the connection of galvanized gable sheets. In fact, drill tip screws are produced with different types of holes, such as hexagonal holes, flanged hexagons, or flat head screws. To order and buy a gable screw, you must provide both the diameter of the screw, which is known as the screw size, and the length of the screw.

M6 allen set screw

Allen set screw is actually a fully threaded rod that has a hexagonal hole on the upper surface to connect with an Allen key. Unlike other types of industrial screws, Allen set screws do not have holes and completely sink into the work piece. The allen screw is used to connect two parts of a piece or machine, such as two parts of bearings. Allen head screws are widely used in machine building industries and are produced in sizes M3 to M16. One of the most widely used sizes of Allen set screws is the M6 ​​size, which is produced in lengths of 10 mm to 60 mm.

mdf screw dia4

Size 4 MDF screws are used to connect MDF panels in decoration and kitchen. MDF screw size 4 is actually a type of self-tapping screw that is produced with large and sharp ribs to have a high speed for connecting MDF wooden sheets. In fact, with the replacement of chipboard and many wooden structures due to the high price of wood with MDF, the use of automatic MDF screws, which are also connected using electrical devices, has been greatly expanded. Amer DF size 4 screw is produced in different lengths from 1 cm to 4 cm and with long pitch ribs.

Class 8 cap head screw

Dry Allen screws are produced in three general shapes: cylindrical head, flat head, and allen nut. The most widely used type of dry Allen screw is the cylindrical head type, which is produced according to the DIN912 standard. Class 8.8 dry allen screw with a cylindrical head, according to the standard, should be produced as a half rib with coarse ribs, but sometimes full rib examples of these screws are also produced to meet the needs of the market.

14mm ceiling screw

Ceiling screw size 14 is produced in different lengths up to 8 cm and is often used in iron and steel grades. ceiling screw 14 is produced as an automatic screw with a drill tip and does not need to be drilled with a drill for connection. Size 14 gable screws are often produced with a hex head that has a groove for connection with a double-sided wrench. However, it is also possible to connect 14 gable screws with a box wrench.