Block

Lever Block

Import and distribution of chain polyphs made in Japan, Germany, Korea and China in Kariz industrial equipment.

Chain polylift for sale
Selling manual polylift
Selling polylift 800 kilos
Sale of polylift 1.6 tons
Sale of polylift 3.2 tons
Sale of polylift 6.3 tons

Polylifts are a device designed to pull the load on the surface and lift it at different angles. The resulting force for this operation is created through hand force and causes the load to move through the handle installed on the puller to the steel chain through which the tensile force is transferred to the load. Polylifts are available in common tonnages of 0.8 tons - 1.6 tons - 3.2 tons - 6.3 tons.

In polylifts, steel chains with G80 steel grade are used, which have a high percentage of carbon and have high surface hardness and wear. Therefore, the service life of the chain polylift is higher than that of the towed polylifts. In the production of polylift connecting chain, which has a minimum tensile strength of 550 N/mm2, thermal hardening is used to provide high tension and security in the connection.


The lifting industry has witnessed significant advancements over the years, with various tools and equipment being developed to enhance efficiency and safety. Among these innovations, the lever bl

1.6 ton vital lever block

1.6 ton chain lever block can be found in the Iranian market under the VITAL brand of Japan and as a Chinese production plan. There is a significant difference in efficiency, safety and longevity as well as in the price of the original Japanese chain lever block and the Chinese design. The original 1.6 ton Japanese Vital chain lever block has been produced with a safety factor of 5:2, which means that it has been tested as a suspension with 2.5 times its nominal capacity during the tensile test and issuance of the consumer certificate. This means that a 4-ton weight was used to test the original Vital Chain Puller. Regarding the examples of the production plan in China, it is said that the maximum real power in the security mode for these lever block is equal to their nominal power.

genuine chain block

Due to the fact that hand chain cranes do not require electricity, this industrial product is widely used in workshops. Hand chain crane is a tool in the form of a block with simple and limited components, which provides users with the ability to carry loads of up to 25 tons without the need for special electrical equipment. The only requirement for using the manual chain crane that can be found in the market in its original form and design is to have ceiling weight capabilities, i.e. a hook with stable weight conditions or a ceiling rail that is installed by using iron sharps.
The manual chain crane uses a chain to connect the load to the crane and also as a connection to transfer the power of the hand and move the load.

1600 kg lever block

The lever block is often used to pull the load or hold the load at an angle, and in rare cases it is used instead of the crane for lifting the load. Of course, the weight capacity of lever block is measured exactly in the hanging state and as a lifting load, and this industrial tool can also function as a crane.
lever block can be found in the market both as a chain with a wider use and as a towing wire with less frequency. lever block connecting steel chains are produced from G80 grade steel, which has a high percentage of carbon and has high surface hardness and abrasion. Therefore, the service life of the chain lever block is higher than that of the towed lever block.

Chain block G80 chain

Two different grades of chains are used on chain blocks that are used for lifting purposes. the hand chain that is pulled by hand is used with lower grades and usually as galvanized with zinc coated surface. this grade of chain has lower levels of carbon and under goes very mild load. on the other hand there is one more chain that is usually used as surface phosphate and in dull black color which is attached at the bottom to a hook and is used for connecting and lifting the load. G80 chain is the most common industrial grade of chain and is produced by hot forging and under goes a heating process in order to increase the tensile strength and surface hardness..

chinese vital chain block

The manual chain overhead crane is used both as 2-way and 4-way. The 2-way chain hand crane uses a hook to connect to the ceiling hook and does not have the ability to move the load horizontally after lifting. Vial 2-way chain hand crane can be supplied in the original form of Japanese production in Dena Bexal trading, and also in the Chinese design, which are often used in the tonnage of 1 to 10 tons. The main examples of Vital chain hand cranes are manufactured according to AS1418.2 standard and have extra load safety protection and are marketed along with JIS and ISO standards.

25 ton chain block

Chain block is used in most industrial applications as a chain. In fact, unlike electric hoist that use electric power, lifting with a manual crane is done manually by rotating a chain, and therefore it is a very suitable choice for lifting in areas where there is no access to electricity. A manual crane consists of a block, inside which a central shaft, bushing and bearing and several gears and sprockets work together to move the manual chain in a long length with low energy to move on the load steel chain. They transmit in a small amount but with high elasticity.

chinese vital 3 ton lever block

3 ton polylift is available in the market with different brands such as VITAL, Japans original Vital, Japans Elephant, and Chinas production plan Vital. Most of the samples of Polylift Vital in the Iranian market are Chinese, which are sold at a much better price than the original Japanese samples.
Vital design polylift with a tonnage of 3 tons is used to maintain telecommunication masts and to place the masts at an angle. The 3-ton chain hoist has a G80 grade steel chain and is 1.5 meters long, and it is considered a manual tool with a lever to hold the load.

5 ton chain block china

VITAL 5 ton manual crane can be supplied both in the original production of the prestigious Vital brand of Japan and in the Chinese production plan in Top Wire Trading. The 5-ton manual crane is supplied as a 2-function, that is, with a hook for ceiling connection and only with the ability of vertical lifting, and with the ability to be converted into a 4-function. The 5-ton 4-function manual crane is supplied with a carriage that can be simple manual or chain type, which provides the conditions for horizontal transfer of the load after lifting.

VITAL Manual chain block

VITAL chain block is in fact made in Japan , however most of the chain blocks available in the market right now are knock off and made in china. chain blocks are very useful mechanical tools for lifting purposes, specially where there is no electricity. VITAL chain blocks are usually available as two dimensional instruments and for hanging anf lifting items. being very durable and practical chain blocks have two chains one to be handled by hand which is galvanized and the other to be attached to the weight which is usually G80 grade.

Harrington 2 ton chain block

Harrington hand crane is actually a product of the United States, while the examples available in the Iranian market are made in China and are designed and sampled from the original product. Harringtons 2 ton manual crane uses a 6 mm hand chain, which is produced in the low grade of G43, and its movement is done manually by the operator. At the point of connection to the load, the Harrington 2 ton chain hoist uses a dry steel chain in G80 grade and 10 mm in size, which is matte black in color and has a very high tensile capacity.

SKF pillow block bearing

SKFKF pillow block bearings are useful type of bearing for suspending the horizontal shafts. they not only help reduce the friction in contact with a rotational shaft using the internal ball bearing but also provide a surface for the shaft to lean over. SKF is a major and European manufacturer of all kinds of ball and roller bearings as well as bearing housing units.

VITAL 1 ton chain block

VITAL 1 ton chain block is a mechanical tool made in Japan that is used in work shops and warehouses for lifting weights and usually is used as a 2D product only to lift objects. chain blocks use two chains within the body one that is known as hand chain is produced of low carbon steel and the load chain is produced of high carbon chain.

Chain block

Chain block is a mechanical lifting instrument that performs absent requirement of electric power. chain blocks are available in various lifting capacities up to 25 ton and uses two different grades of chain for lifting purposes. VITAL is the most well-known manufacturer of chain blocks in the world.

pillow block bearing

pillow block bearing
ucp
uct
ucf
ucfl