• تلفن
• 0086-29-88416613
• | موبایل
• 15710486683

دستگاه محاسبه وزن

دستگاه محاسبه وزن

Attention The system is suitable for elevator that adopts the Can_BUS
agreement rope installed load weighing device, please kindly read the
following chapters before operation. The elevator load weighing device
has strict payload limit, please suitably installed our company will not
responsible for any loss for person and the device caused by unsuitbale
operation otherwise.
Note We are only responsible for the quanlity of products itself in any
cases.

Announcement
Our company reserve the right to change the products
for the development of the technology, the parameters will be subject to
random products manaul.1. The sketch of the mechine appearancepicture[1]
2. The installation sketch of the movable car system picture[2]
Try to install the sensor at the center of the car or the original overload
switch of the elevator, installing the sytem at the bottom beam of the
supporting, getting the inductive magnet attracted on the moving car and
make sure the observe side faces the induction point of the sensor.
The support of the system should be made according to the basis
condition of the elevator, and adopt to the material which is not so easy to
deformation. The thickness of the support should be more than 4mm or
with reinforcement to avoid swinging.
Installing the system to let the magnet at the bottom of car face the
center of the upper sensor. Make sure the end face of the sensor parallel
with the end face of the magnet.
خواهشمند استفاده از ان به اندازه ظرفیت تایین شده هستیم شرکت ما مسئولیتی در قبال استفاده نامناسب نمیپذرد
برند : elevator weighting devices
ظرفیت : weighting devices
ساخت : China